kr 5,374.00
kr 7,061.00
Pakke med Hytera PD785u + prog kabel,
kr 5,824.00
kr 7,511.00
Pakke med Hytera PD785u + prog kabel,
kr 339.00
kr 439.00
PNI HP-62 Tilbehørspakke med batteri, ladeplugg og antenne
kr 349.00
kr 599.00
Juerterbar mikrofon arm med 360 grader bevegelse
Yaesu - FT-DX101D - B-Vare
kr 46,750.00
kr 47,000.00
-kr 250.00
AAA x 4 Batteriholder med bryter
kr 23.00
LDG - RU - Unun
kr 694.00
ICOM - OPC-2344-1
kr 1,195.00
Quansheng UV-K5(8) 144/430Mhz
kr 495.00
N-hun pigtail til SMA han (RG-142)
kr 125.00
N-hun pigtail til SMA han (RG-402)
kr 125.00
LDG - AT-200PRO-II
The LDG AT-200ProII is a general purpose automatic tuner suitable for any amateur application. It covers 1.8-54 MHz, and features a two-position antenna switch allowing instant switching between two antennas. The AT-200ProII requires just 5 watts for operation but will handle up to 250 watts, making it ideal for the new generation of higher powered transceivers, or for QRP operations that sometimes use a small amplifier.
Like all LDG tuners the AT-200ProII operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. The AT-200ProII also features LDG’s advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favorite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.
Large, easy-to-read LED bargraphs show forward and reverse power power in peak or average mode, and SWR. Two power scales are provided: 25 watts and 250 watts. The bargraphs also indicate tuner status and input confirmations.
The AT-200ProII uses LDG’s state-of-the-art, processor-controlled Switched-L tuning network. It will match dipoles, verticals, inverted-Vees or virtually any coax-fed antenna. With an optional LDG balun, you can also use longwires or antennas fed with ladder-line. It handles 100 watts SSB or 50 watts FM/Digital when used with a solid-state transceiver; vacuum tube transmitters cut the power ratings about in half.
Specifications:
- 5 to 250 watts SSB and CW. 100 watts on 6M. 75 watts with PSK or digital modes.
- Easy to read LED bargraph display for RF power, SWR and status
- LEDs for Antenna Position and Bypass
- 4,000 memories (2000 for each antenna) for instantaneous band changing
- Two position antenna switch with memories for four antennas on each position
- Tuning time: 0.5 to 6 seconds full tune, < 0.1 second memory tune
- Built in frequency counter for memory operation
- Frequency coverage: 1.8 to 54.0 MHz.
- Tunes 6 to 800 ohm loads (16 to 150 ohms on 6M), 6 to 3600 ohms with optional 4:1 Balun (LDG RBA 4-1)
- For Dipoles, Verticals, Vees, Beams or and Coax Fed Antenna
- Optional external Balun allows tuning of random length, long wire or ladder line fed antennas
- Includes 6' DC power cable
- Power requirements: 11 to 16 volts DC at 750 mA max during tuning
- www.Jameco.com WM1012-760 and 1953663 are compatible power supplies
- Enclosure: 9.5D x 7.1W x 2.0H inches
- Weight: 2 pounds
Sist vist
Kunder som kjøpte dette produktet kjøpte også:
kr 369.00
Kan vinkles opp til 30 grader vekk fra vertikalt.
16 andre produkter i samme kategori:
kr 12,495.00
Palstar AT-2K Manuell antennetuner unsymm. (symm. med opt. Balun), 1,8-54MHz, 2000W
